The Cable Plug (plug connector) is an accessory to the Electrode Cable, used to connect electrodes in myoelectric systems.

The 13E200 Myobock Electrode lessens sensitivity to low and high frequency interferences to minimize prostheses operation interruption and provide noise filtration.

Electrode cable connection with IDC termination, with 13E206 Electrode Accessories, without electrode cable. Creates an airtight seal between the inner socket and outer socket when embedded into a mounting suspension of elastic material. The Suction Socket Electrode also prevents sweat from penetrating between the outer and inner socket, preventing damage to the electrical and mechanical components caused by corrosion.The Suction Socket Electrode can not only be used for standard fittings, but is also suitable for application in suction sockets. Combining the suction socket electrode with a 12V10 Tube Valve for a suction socket creates a vacuum effect in the socket, ensuring optimal linkage between the residual limb and the socket.Shielding and filtering technologies largely protect the 13E202 Suction Socket Electrode against high frequency interference caused by cell phones, walkie-talkies, computers or anti-theft systems in shopping centers so that the correct function of the myoelectrically controlled prosthesis is not affected. The electrode contacts are made from pure titanium and are suitable for people with allergies.Includes:(1) 13E200 electrode(1) 13E80 adjustment tool(1) 13E191 casting template for inner socket(1) 13E192 lamination template(2) 507S15 lamination plate with bore(1) 13E201 electrode accessories for vacuum-formed inner sockets(2) 503F3 socket screw with Allen headThe following products are also required:13E129=* electrode cable

The 12K110N DynamicArm Plus elbow joint is myoelectrically-controlled and driven by an electric motor. It is intended for fitting users with transhumeral or higher amputation levels or users with more than 2 original signals. The DynamicArm Plus has the same features as the DynamicArm standard. In addition, it can also process up to 8 input signals. Other prosthesis components can not be used.DynamicArm Plus is suitable for combination with other myoelectric prosthetic components such as:10S17 Electric Wrist Rotator8E38=8* SensorHand Speed8E38=9* MyoHand VariPlus Speed8E33=9 System Electric Greifer DMC VariPlusScope of delivery:DynamicArm Plus 12K110N*Dummy for electric wrist rotatorBattery charger with EU and US plugLamination ringAssembly hookAlignment tool2 Year Manufacturer's WarrantyOptional items ordered separately:Coaxial plug or Electric wrist rotatorInput device & cables3rd Year Extended Warranty: DynamicArm Plus SP-12K110N=3

The System Electric Hand DMC Plus is suitable for all amputation levels except wrist disarticulation. It features a DMC and DMC plus control mode. The desired control mode is selected with the integrated 13E185 Function Plug. In DMC plus control mode, after gripping once with maximum grip force, a higher signal is required to open the hand. This reduces the risk of opening the hand with undesired muscle signals. In this system, two independent measurement and control systems proportionally control gripping speed as well as gripping force. Gripping speed and gripping force are determined by the strength of the muscle signal. It is designed for those who don’t utilize the AutoGrasp function. It features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackSpecifically designed for adolescents or women with small handsDynamic Mode Control (DMC) plus control system offers additional security for user and is engaged by removing a function plugThree power supply alternatives accommodate variable residual limb shapesPassive wrist rotation with ratchet lock (can be replaced by the 11S30 Friction RingThe electrodes must be adjusted with the 757M11 MyoBoy

The System Electric Hand Digital Twin with Quick Disconnect Wrist is suitable for all amputation levels, except wrist disarticulation. The Digital Twin control features a digital and dual channel control mode. The desired control mode is selected with the integrated 13E185 function plug. The hand features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. With potentiometer for adjusting the switching threshold (double-channel control). An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackProvides passive wrist rotation with ratchet lock (can be replaced by the 11S30 Friction Ring)

The SensorHand Speed with quick-disconnect wrist is suitable for all amputation levels, except wrist disarticulation. This hand features the automatic Auto-Grasp SUVA sensor technology, the FlexiGrip function, as well as different control modes for the fitting with one or two electrodes. It features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Gives passive wrist rotation with ratchet lock (can be replaced with the 11S30 Friction Ring)Electrode(s) must be adjusted with the 757M11 MyoBoy13E184=* Coding Plugs of various colours or the 757T13 MyoSelect are used to select the desired control mode. Please also note the table in the user manual for this13E184=1 (White: DMC plus® control)13E184=2 (Red: AutoControl LowInput control)13E184=3 (Green: AutoControl)13E184=4 (Blue: VarioControl)13E184=5 (Yellow: VarioDual Control)13E184=6 (Violet: DMC plus® Control SUVA sensors and FlexiGrip can be switched off)Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack

The MyoHand VariPlus Speed with quick disconnect wrist is suitable for all amputation levels except wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. The high gripping strength (approx. 100 N) and speed (up to 300 mm/s), allow objects can be gripped quickly and precisely. The hand comes with a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackWith the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications, for optimum adaptationThe following control modes can be selected with the 757T13 MyoSelect:DMC plusAutoControl LowInputVarioControlVarioDualDigitalControlDoubleChannel Control

The System Electric Hand Digital Twin has a lamination ring suitable for wrist disarticulation. It features a centrally guided flat cable with automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. This hand has a potentiometer for adjusting the switching threshold (double-channel control), and an integrated slip clutch that allows the hand to be opened in case of power supply or myoelectric control failure.Gives passive wrist rotation with frictionFeatures a digital and dual channel control mode (desired control selected with integrated 13E185 function plug)Can be operated with the 757B35=* MyoEnergy Integral, 757B20/757B21 EnergyPack or the 757B15 X-ChangePack

SensorHand Speed with lamination ring wrist connection suitable for wrist disarticulation. Passive wrist rotation with friction. The SensorHand Speed features the automatic Auto-Grasp SUVA sensor technology, the FlexiGrip function as well as different control modes for the fitting with one or two electrodes. 13E184=* Coding Plugs of various colors or the 757T13 MyoSelect are used to select the desired control mode.13E184=1 (White: DMC plus control)13E184=2 (Red: AutoControl LowInput control)13E184=3 (Green: AutoControl)13E184=4 (Blue: VarioControl)13E184=5 (Yellow: VarioDual Control)13E184=6 (Violet: DMC plus Control SUVA sensors and FlexiGrip can be switched off)The SensorHand Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack. It features a central flat cable, automatic shut-off electronics and integrated on-off switch, low friction bevel gear, positive back lock, and System Inner Hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.

MyoHand VariPlus Speed with lamination ring wrist connection is suitable for wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. Thanks to the high gripping strength (approx. 100 N) and speed (up to 300 mm/s), objects can be gripped quickly and precisely. With the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications. This permits optimum adaptation to the needs and abilities of the prosthesis wearer. The following control modes can be selected with the 757T13 MyoSelect: DMC plus AutoControl LowInput VarioControl VarioDual DigitalControl DoubleChannel Control The MyoHand VariPlus Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack. With central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.

The MyoHand VariPlus Speed with threaded stud wrist connection is suitable for all amputation levels except wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. Thanks to the high gripping strength (approx. 100 N) and speed (up to 300 mm/s), objects can be gripped quickly and precisely. This hand has a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure. With the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications. This permits optimum adaptation to the needs and abilities of the prosthesis wearer.The MyoHand VariPlus Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackThe following control modes can be selected with the 757T13 MyoSelect:DMC plusAutoControl LowInputVarioControlVarioDualDigitalControlDoubleChannel Control

bebionic Hand with Short Wrist

By ottobock

This page is for the bebionic hand with short wrist ONLY. In order to fully fabricate, practitioners will need to also purchase the following options: Wrist rotation option: Active (1E205, 10S17); Passive (9E169, 10S4) Myo electrodes option: Suction (13E202=60) or Standard (13E200=60) Myo cables: 600mm (13E129=600) or 300mm (13E129=300) MyoEnergy Integral battery: Small hands with passive rotation (757B35=3), Any size with active rotation (757B35=5) MyoCharge Integral charger: (757L35) Optional extended warranty: 3yr (SP-8E7=3) or 5yr (SP-8E7=5) Bluetooth Long Range Dongle: B33061 (Optional) The bebionic Short Wrist consists of a low-profile connector for patients with a long residual limb. A short wrist lamination ring is also supplied with these hands. With this wrist option, the patient still maintains a high degree of freedom since the hand rotates against constant yet adjustable friction. The bebionic hand comes with a 24-month warranty at no additional cost, options to extend the warranty up to 5 years, and clinical and reimbursement support. Small hand is available in black or white finish Medium hand is available in black finish Bluetooth module now in both small and medium hands. You now only need one Bluetooth adapter (dongle) to easily connect to bebalance+ New bebalance+ V1.4 software with improved usability Improved cable guidance to secure thumb in opposition or lateral position PDAC Approved

bebionic Hand with Flexion Wrist

By ottobock

This page is for the bebionic hand with flexion wrist ONLY. In order to fully fabricate, practitioners will need to also purchase the following options: Wrist rotation option: Active (1E205, 10S17); Passive (9E169, 10S4) Myo electrodes option: Suction (13E202=60) or Standard (13E200=60) Myo cables: 600mm (13E129=600) or 300mm (13E129=300) MyoEnergy Integral battery: Small hands with passive rotation (757B35=3), Any size with active rotation (757B35=5) MyoCharge Integral charger: (757L35) Optional extended warranty: 3yr (SP-8E7=3) or 5yr (SP-8E7=5) Bluetooth Long Range Dongle: B33061 (Optional) PDAC Approved The flexion wrist allows the patient to position the hand in five locking levels of flexion and extension from -40° to +40° in 20° increments. The bebionic hand comes with a 24-month warranty at no additional cost, options to extend the warranty up to 5 years, and clinical and reimbursement support. Small hand is available in black or white finish Medium hand is available in black finish Bluetooth module now in both small and medium hands. You now only need one Bluetooth adapter (dongle) to easily connect to bebalance+ New bebalance+ V1.4 software with improved usability Improved cable guidance to secure thumb in opposition or lateral position

The Transcarpal Hand DMC (Dynamic Mode Control) Plus utilizes cable lamination anchors to maintain a minimum build height, the Transcarpal Hand DMC plus provides a compact myoelectric option for fitting residual limb lengths from wrist disarticulation to transcarpal levels. This hand provides proportional control of grip speed and grip force in relation to the strength of the muscle signal. It features a centrally guided flat cable, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackMinimal clearance requiredVariable grip speed ranges from 15-130 mm/secCable Loops in lieu of lamination ring provide flexibility in fabrication30% lighter and 30% shorter than a standard 8E38 hand for longer amputationsNo wrist rotation: patient must be able to actively pronate and supinate the hand

The Transcarpal Hand DMC (Dynamic Mode Control) Plus utilizes cable lamination anchors to maintain a minimum build height, the Transcarpal Hand DMC plus provides a compact myoelectric option for fitting residual limb lengths from wrist disarticulation to transcarpal levels. This hand provides proportional control of grip speed and grip force in relation to the strength of the muscle signal. It features a centrally guided flat cable, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackMinimal clearance requiredVariable grip speed ranges from 15-130 mm/secCable Loops in lieu of lamination ring provide flexibility in fabrication30% lighter and 30% shorter than a standard 8E38 hand for longer amputationsNo wrist rotation: patient must be able to actively pronate and supinate the hand

Used for the 9X50 Linear Control Element. The 4-step Transducer allows for proportional control of prosthetic components at four different speed levels using harnesses.

The 757M11 MyoBoy system enables you to:Measure your patient’s muscle strength and adjust the electrodes as requiredTrain your patient on controlling their prosthetic handUtilize the indication assistant to determine the right MyoBock system for your patientDocument and analyze progress using the Communication Cable 757P39Order 1000 mm cable (13E129=G1000) and electrodes (13E200 or 13E202) separatelyScope of delivery:757G265=1 Quick Reference Guide757Z18 Grounding Cable757P44 Electrode Adapter757Z174 Electrode ArmbandScrewdriverUSB CableCarrying CaseOptional:757P23 Test Adapter757P39 MyoBoy Communication Cable1000 mm cable (13E129=G1000) and electrodes (13E200 or 13E202) must be ordered separately. The 757M11 MyoBoy is a device for practitioners to utilize in training upper extremity patients to control a prosthetic hand and train their muscles. The MyoBoy measures muscle strength and adjusts the electrodes to the patient’s unique needs. It is a comprehensive software system used to train patients in controlling terminal device as well as train muscles.

The 12K12 MovolinoArm Friction is available in one size. It is the perfect complement to the current Ottobock product portfolio, since it allows fittings on the right and left side for children 3 to 5 years old. It is compatible with passive, cable-controlled and myoelectric arm prosthesis systems. It weighs only 182g. The elbow has one friction setting for humeral rotation and one for flexion or extension of the forearm. Parents can easily set this friction setting.Yet another advantage is that the elbow is compatible with the components of the 7.4 Volt Children System. The MovolinoArm Friction features an impressive design that has a very realistic natural appearance. The hand adapter of the 12K12 MovolinoArm Friction is naturally compatible with the Electric Hand 2000.The 10A40 Wood Adapter is available for passive prosthetic fittings. The 10V18=34 or 10V36=34 Wrist Unit is compatible with body-powered fittings. This joint can also be fitted in conjunction with the 2000 8E51=* Childrens Hand.