Used to connect the electrodes in myoelectric systems to a:9E169 Coaxial Plug13E205 MyoRotronic9E369/9E370 4-in -1 LS Controller or 9E420 7-in-1 Controller13E190 Distributor or 10S7 Electric Wrist Rotator

Lamination ring for System Electric Hands or System Electric Greifers with lamination protection cover for bonding.

The MyoRotronic is compatible with all ottobock Myobock System Electric Hands and System Electric Greifers with Quick-Disconnect Wrist and enables proportional or digital control of the 10S17 Electric Wrist Rotator.5 different programs can be selected using the 757T13 Myo Select and allow individual adaptation to the respective patient. One or two 13E200 Electrodes or 13E202 Suction Socket Electrodes or a combination of one electrode and a 9X50/9X52 Linear Control Element are used to control the 13E205 MyoRotronic.Includes:MyoRotronic13E183 Buzzer for acoustic feedback on the switchoverThe 757T13 MyoSelect is required to select programs and adjust the 13E205 MyoRotronic. When using the 10S17 Electric Wrist Rotator and the 13E205 MyoRotronic, the distance between the residual limb end and wrist must be at least 65 mm . The rotation can be switched off using the 9X24 Connection Cable.

The Electric Wrist Rotator provides electrical rotation that can be operated with all ottbock System Electric Hands that are equipped with the Quick Disconnect Wrist.Required for pronation and supination of the handIf muscular tension is not sufficient for operation with the 13E205 MyoRotonic, the 10S17 can be controlled by the 9X14 Harness Pull Switch, the 9X18 Traction Switch, or the 9X25 Rocker SwitchIncludes:11S4 Lock Ring11S61 Wrist Drive with Coaxial Plug11S25 Lock Ring9E85 Protective Cap9E363 Drive Unit9E365 Protection Plug

For connecting the two electrodes and battery.

Includes: Coupling Piece 11S4 Lock Ring

The 13E200 Myobock Electrode lessens sensitivity to low and high frequency interferences to minimize prostheses operation interruption and provide noise filtration.

Electrode cable connection with IDC termination, with 13E206 Electrode Accessories, without electrode cable. Creates an airtight seal between the inner socket and outer socket when embedded into a mounting suspension of elastic material. The Suction Socket Electrode also prevents sweat from penetrating between the outer and inner socket, preventing damage to the electrical and mechanical components caused by corrosion.The Suction Socket Electrode can not only be used for standard fittings, but is also suitable for application in suction sockets. Combining the suction socket electrode with a 12V10 Tube Valve for a suction socket creates a vacuum effect in the socket, ensuring optimal linkage between the residual limb and the socket.Shielding and filtering technologies largely protect the 13E202 Suction Socket Electrode against high frequency interference caused by cell phones, walkie-talkies, computers or anti-theft systems in shopping centers so that the correct function of the myoelectrically controlled prosthesis is not affected. The electrode contacts are made from pure titanium and are suitable for people with allergies.Includes:(1) 13E200 electrode(1) 13E80 adjustment tool(1) 13E191 casting template for inner socket(1) 13E192 lamination template(2) 507S15 lamination plate with bore(1) 13E201 electrode accessories for vacuum-formed inner sockets(2) 503F3 socket screw with Allen headThe following products are also required:13E129=* electrode cable

The Bluetooth long range dongle is required to program the bebionic hand with bebalance+ software. For bebionic small and medium hands enabled with Bluetooth technology.

757L35 MyoCharge Integral charger is designed to facilitate quick and easy charging of the embedded MyoEnergy Integral batteries (757B35=0, 757B35=1 or 757B35=3) while in the socket wall.Charging is done by connecting the charging plug to the charging receptacle on the outside of the socket. The integrated magnet allows for the charging plug to be easily attached to the charging receptacle. The special contour of the charging receptacle and charging plug assures the quick, reliable positioning of the two components to each other.LEDs indicate the readiness of the charger and the current battery capacityIncludes:757L35 MyoCharge Integral battery charger757L16 power supply

The MyoEnergy Integral 757B35=* is an integrated power supply system made up of several components. The charging receptacle enables battery contact, indicates the current charge status and serves to switch the prosthesis on and off and release it in an emergency. The communication cable with a 3-pin receptacle is used for the exchange of data. The supply cable establishes the connection between the battery and the respective prosthesis component. The battery consists of two cells with different capacities.Includes:Battery Lamination DummyCharging Receptacle Lamination DummyDrilling Template for Charging ReceptacleCharger must be ordered separately - 757L35 MyoCharge Integral

Electrode lamination accessories for the 13E200 electrode.Includes:13E191 Pattern for Inner Shell13E192 Lamination Template for Outer Socket507S15 Lamination Disk, serrated503F3 Socket Screw with Allen head13E80 Sensitivity Adjustment ToolUse a 709S10=2 Allen Head Wrench for 503F3 Socket Screw when connecting the inner and outer socket.

For fastening the 743Y41 Alignment Rod and fabricating an arm prosthesis.

Color swatch set for bebionic gloves.

Made of layered silicone and reinforced with an integrated mesh liner, the bebionic gloves are soft, easy to clean, and easily donned or doffed. The micropigmentation coloring process adds beauty and a natural aesthetic. The bebionic skin silicone gloves add natural beauty and protection to the finished prosthesis. Easy to clean with warm water and pH- neutral soap UV resistant and thermally stable for a longer shelf life Available for small, medium, and large bebionic hands Order a color wheel (646M82) below under Frequently Bought Together for color options Also available in jet black tone (see 8S710)

The Electrode Lamination Accessories for 13E202 Suction Socket Electrode includes lamination dummies for socket and outershell, socket screws, socket washers and sensitivity adjustment tool.Includes:13E203 Lamination Template for Inner Socket13E204 Lamination template for Outer Socket507S15 Lamination Disk, serrated503F3 Socket Screw with Allen head13E80 Sensitivity Adjustment Tool