Skip to main content Skip to search Skip to main navigation

Electric Wrist Rotator

Part # Description  

Product Information

The Electric Wrist Rotator provides electrical rotation that can be operated with all ottbock System Electric Hands that are equipped with the Quick Disconnect Wrist.

  • Required for pronation and supination of the hand
  • If muscular tension is not sufficient for operation with the 13E205 MyoRotonic, the 10S17 can be controlled by the 9X14 Harness Pull Switch, the 9X18 Traction Switch, or the 9X25 Rocker Switch
  • Includes:
  • 11S4 Lock Ring
  • 11S61 Wrist Drive with Coaxial Plug
  • 11S25 Lock Ring
  • 9E85 Protective Cap
  • 9E363 Drive Unit
  • 9E365 Protection Plug

Specifications

  • Weight (g): 96
  • Operating Voltage: 6/7.2 V
  • Approx. No-Load Current: 150 mA
  • Approx. Stall Current: 1000 mA
  • Rotation Range: 360 30 Degrees
  • Idle Speed: 13.5 U/min
  • Corresponds to Rotation Angle of: 81 28 degrees/sec
Sold each.
Manufacturer Recommended HCPCS: L7259
Skip product gallery

Frequently Bought Together

Lamination Ring

Lamination Ring

By ottobock

Lamination ring for System Electric Hands or System Electric Greifers with lamination protection cover for bonding.

MyoRotronic

MyoRotronic

By ottobock

The MyoRotronic is compatible with all ottobock Myobock System Electric Hands and System Electric Greifers with Quick-Disconnect Wrist and enables proportional or digital control of the 10S17 Electric Wrist Rotator.5 different programs can be selected using the 757T13 Myo Select and allow individual adaptation to the respective patient. One or two 13E200 Electrodes or 13E202 Suction Socket Electrodes or a combination of one electrode and a 9X50/9X52 Linear Control Element are used to control the 13E205 MyoRotronic.Includes:MyoRotronic13E183 Buzzer for acoustic feedback on the switchoverThe 757T13 MyoSelect is required to select programs and adjust the 13E205 MyoRotronic. When using the 10S17 Electric Wrist Rotator and the 13E205 MyoRotronic, the distance between the residual limb end and wrist must be at least 65 mm . The rotation can be switched off using the 9X24 Connection Cable.

Dynamic Arm Plus

Dynamic Arm Plus

By ottobock

The 12K110N DynamicArm Plus elbow joint is myoelectrically-controlled and driven by an electric motor. It is intended for fitting users with transhumeral or higher amputation levels or users with more than 2 original signals. The DynamicArm Plus has the same features as the DynamicArm standard. In addition, it can also process up to 8 input signals. Other prosthesis components can not be used.DynamicArm Plus is suitable for combination with other myoelectric prosthetic components such as:10S17 Electric Wrist Rotator8E38=8* SensorHand Speed8E38=9* MyoHand VariPlus Speed8E33=9 System Electric Greifer DMC VariPlusScope of delivery:DynamicArm Plus 12K110N*Dummy for electric wrist rotatorBattery charger with EU and US plugLamination ringAssembly hookAlignment tool2 Year Manufacturer's WarrantyOptional items ordered separately:Coaxial plug or Electric wrist rotatorInput device & cables3rd Year Extended Warranty: DynamicArm Plus SP-12K110N=3

Dynamic Arm

Dynamic Arm

By ottobock

The 12K100N DynamicArm is a myoelectrically-controlled elbow joint driven by an electric motor and is intended users with transhumeral or higher amputation levels. DynamicArm Plus (12K110N) is available for users with more than 2 myo-signals.The DynamicArm combines all advantages of ErgoArm Electronic plus. Furthermore, it is controlled entirely by myoelectric signals. In addition to hand and rotation of wrist joint, elbow joint flexion can also be controlled by muscle signals.DynamicArm can be combined with other myoelectric prosthetic components such as:10S17 Electric Wrist Rotator8E38=* System Electric Hand8E33=* System Electric GreiferScope of delivery:DynamicArm 12K100N*Dummy for electric wrist rotatorBattery charger with EU and US plugLamination ringAssembly hookAlignment tool2 Year Manufacturer's WarrantyOptional items ordered separately:Coaxial plug or Electric wrist rotatorInput device & cables3rd Year Extended Warranty: DynamicArm SP-12K100N=3

System Electric DMC Plus with Quick Disconnect Wrist

System Electric DMC Plus with Quick Disconnect Wrist

By ottobock

The System Electric Hand DMC Plus is suitable for all amputation levels except wrist disarticulation. It features a DMC and DMC plus control mode. The desired control mode is selected with the integrated 13E185 Function Plug. In DMC plus control mode, after gripping once with maximum grip force, a higher signal is required to open the hand. This reduces the risk of opening the hand with undesired muscle signals. In this system, two independent measurement and control systems proportionally control gripping speed as well as gripping force. Gripping speed and gripping force are determined by the strength of the muscle signal. It is designed for those who don’t utilize the AutoGrasp function. It features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackSpecifically designed for adolescents or women with small handsDynamic Mode Control (DMC) plus control system offers additional security for user and is engaged by removing a function plugThree power supply alternatives accommodate variable residual limb shapesPassive wrist rotation with ratchet lock (can be replaced by the 11S30 Friction RingThe electrodes must be adjusted with the 757M11 MyoBoy

System Electric Hand Digital Twin with Quick Disconnect Wrist

System Electric Hand Digital Twin with Quick Disconnect Wrist

By ottobock

The System Electric Hand Digital Twin with Quick Disconnect Wrist is suitable for all amputation levels, except wrist disarticulation. The Digital Twin control features a digital and dual channel control mode. The desired control mode is selected with the integrated 13E185 function plug. The hand features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. With potentiometer for adjusting the switching threshold (double-channel control). An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackProvides passive wrist rotation with ratchet lock (can be replaced by the 11S30 Friction Ring)

bebionic Hand with Short Wrist
PDAC Verified

bebionic Hand with Short Wrist

By ottobock

This page is for the bebionic hand with short wrist ONLY. In order to fully fabricate, practitioners will need to also purchase the following options: Wrist rotation option: Active (1E205, 10S17); Passive (9E169, 10S4) Myo electrodes option: Suction (13E202=60) or Standard (13E200=60) Myo cables: 600mm (13E129=600) or 300mm (13E129=300) MyoEnergy Integral battery: Small hands with passive rotation (757B35=3), Any size with active rotation (757B35=5) MyoCharge Integral charger: (757L35) Optional extended warranty: 3yr (SP-8E7=3) or 5yr (SP-8E7=5) Bluetooth Long Range Dongle: B33061 (Optional) The bebionic Short Wrist consists of a low-profile connector for patients with a long residual limb. A short wrist lamination ring is also supplied with these hands. With this wrist option, the patient still maintains a high degree of freedom since the hand rotates against constant yet adjustable friction. The bebionic hand comes with a 24-month warranty at no additional cost, options to extend the warranty up to 5 years, and clinical and reimbursement support. Small hand is available in black or white finish Medium hand is available in black finish Bluetooth module now in both small and medium hands. You now only need one Bluetooth adapter (dongle) to easily connect to bebalance+ New bebalance+ V1.4 software with improved usability Improved cable guidance to secure thumb in opposition or lateral position PDAC Approved

bebionic Hand with Flexion Wrist
PDAC Verified

bebionic Hand with Flexion Wrist

By ottobock

This page is for the bebionic hand with flexion wrist ONLY. In order to fully fabricate, practitioners will need to also purchase the following options: Wrist rotation option: Active (1E205, 10S17); Passive (9E169, 10S4) Myo electrodes option: Suction (13E202=60) or Standard (13E200=60) Myo cables: 600mm (13E129=600) or 300mm (13E129=300) MyoEnergy Integral battery: Small hands with passive rotation (757B35=3), Any size with active rotation (757B35=5) MyoCharge Integral charger: (757L35) Optional extended warranty: 3yr (SP-8E7=3) or 5yr (SP-8E7=5) Bluetooth Long Range Dongle: B33061 (Optional) PDAC Approved The flexion wrist allows the patient to position the hand in five locking levels of flexion and extension from -40° to +40° in 20° increments. The bebionic hand comes with a 24-month warranty at no additional cost, options to extend the warranty up to 5 years, and clinical and reimbursement support. Small hand is available in black or white finish Medium hand is available in black finish Bluetooth module now in both small and medium hands. You now only need one Bluetooth adapter (dongle) to easily connect to bebalance+ New bebalance+ V1.4 software with improved usability Improved cable guidance to secure thumb in opposition or lateral position