The 757Z184=* battery mounting set is used to fabricate a battery receptacle into either a laminated outershell or an Ottobock elbow unit, such as an ErgoArm elbow. The 757Z184=* battery mounting set is designed for large size 757B20 lithium-ion myo batteries and is available in two versions:Standard version:Available in four colors (4, 11, 15 and black)Does not connect to MyoBoyUses 13E188=200 or 13E188=600 battery cablesOnce installed it is not removable from prosthesisMyoBoy version:Available in color 4 onlyIncludes integrated screw connection for removing the battery box from the prosthesisIncludes external capped outlet for connection to MyoBoy deviceUses 757P41 cable for connection to battery box and 9E169 coaxial plug or 13E205 MyoRotronic and 757P41 cable for 757P39 MyoBoy connection cable

The SensorHand Speed with quick-disconnect wrist is suitable for all amputation levels, except wrist disarticulation. This hand features the automatic Auto-Grasp SUVA sensor technology, the FlexiGrip function, as well as different control modes for the fitting with one or two electrodes. It features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Gives passive wrist rotation with ratchet lock (can be replaced with the 11S30 Friction Ring)Electrode(s) must be adjusted with the 757M11 MyoBoy13E184=* Coding Plugs of various colours or the 757T13 MyoSelect are used to select the desired control mode. Please also note the table in the user manual for this13E184=1 (White: DMC plus® control)13E184=2 (Red: AutoControl LowInput control)13E184=3 (Green: AutoControl)13E184=4 (Blue: VarioControl)13E184=5 (Yellow: VarioDual Control)13E184=6 (Violet: DMC plus® Control SUVA sensors and FlexiGrip can be switched off)Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack

The MyoHand VariPlus Speed with quick disconnect wrist is suitable for all amputation levels except wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. The high gripping strength (approx. 100 N) and speed (up to 300 mm/s), allow objects can be gripped quickly and precisely. The hand comes with a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackWith the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications, for optimum adaptationThe following control modes can be selected with the 757T13 MyoSelect:DMC plusAutoControl LowInputVarioControlVarioDualDigitalControlDoubleChannel Control

SensorHand Speed with lamination ring wrist connection suitable for wrist disarticulation. Passive wrist rotation with friction. The SensorHand Speed features the automatic Auto-Grasp SUVA sensor technology, the FlexiGrip function as well as different control modes for the fitting with one or two electrodes. 13E184=* Coding Plugs of various colors or the 757T13 MyoSelect are used to select the desired control mode.13E184=1 (White: DMC plus control)13E184=2 (Red: AutoControl LowInput control)13E184=3 (Green: AutoControl)13E184=4 (Blue: VarioControl)13E184=5 (Yellow: VarioDual Control)13E184=6 (Violet: DMC plus Control SUVA sensors and FlexiGrip can be switched off)The SensorHand Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack. It features a central flat cable, automatic shut-off electronics and integrated on-off switch, low friction bevel gear, positive back lock, and System Inner Hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.

MyoHand VariPlus Speed with lamination ring wrist connection is suitable for wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. Thanks to the high gripping strength (approx. 100 N) and speed (up to 300 mm/s), objects can be gripped quickly and precisely. With the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications. This permits optimum adaptation to the needs and abilities of the prosthesis wearer. The following control modes can be selected with the 757T13 MyoSelect: DMC plus AutoControl LowInput VarioControl VarioDual DigitalControl DoubleChannel Control The MyoHand VariPlus Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack. With central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.

The MyoHand VariPlus Speed with threaded stud wrist connection is suitable for all amputation levels except wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. Thanks to the high gripping strength (approx. 100 N) and speed (up to 300 mm/s), objects can be gripped quickly and precisely. This hand has a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure. With the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications. This permits optimum adaptation to the needs and abilities of the prosthesis wearer.The MyoHand VariPlus Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackThe following control modes can be selected with the 757T13 MyoSelect:DMC plusAutoControl LowInputVarioControlVarioDualDigitalControlDoubleChannel Control

The Transcarpal Hand DMC (Dynamic Mode Control) Plus utilizes cable lamination anchors to maintain a minimum build height, the Transcarpal Hand DMC plus provides a compact myoelectric option for fitting residual limb lengths from wrist disarticulation to transcarpal levels. This hand provides proportional control of grip speed and grip force in relation to the strength of the muscle signal. It features a centrally guided flat cable, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackMinimal clearance requiredVariable grip speed ranges from 15-130 mm/secCable Loops in lieu of lamination ring provide flexibility in fabrication30% lighter and 30% shorter than a standard 8E38 hand for longer amputationsNo wrist rotation: patient must be able to actively pronate and supinate the hand

The Transcarpal Hand DMC (Dynamic Mode Control) Plus utilizes cable lamination anchors to maintain a minimum build height, the Transcarpal Hand DMC plus provides a compact myoelectric option for fitting residual limb lengths from wrist disarticulation to transcarpal levels. This hand provides proportional control of grip speed and grip force in relation to the strength of the muscle signal. It features a centrally guided flat cable, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackMinimal clearance requiredVariable grip speed ranges from 15-130 mm/secCable Loops in lieu of lamination ring provide flexibility in fabrication30% lighter and 30% shorter than a standard 8E38 hand for longer amputationsNo wrist rotation: patient must be able to actively pronate and supinate the hand

757Z185=1 is the standard version battery box for large lithium-ion battery 757B20 - it does not include 757Z186 locking lever. The battery box is designed to accommodate a 757B20 large lithium-ion Myo battery to provide electric power for the prosthesis. 757Z185=2 includes an external capped outlet for connection to the MyoBoy device. This version also includes integrated screw connection for removing the battery box from the prosthesis.

757Z191=1 is the standard version battery box for small lithium-ion battery 757B21 - it does not include 757Z186 locking lever. The battery box is designed to accommodate a 757B21 small lithium-ion Myo battery to provide electric power for the prosthesis. 757191=2 includes an external capped outlet for connection to the MyoBoy device. This version also includes integrated screw connection for removing the battery box from the prosthesis.