Battery cable for 757B20 and 757B21 series batteries.For connecting the 757Z185=1 or 757Z191=1 Battery Receptacle to 9E169 Coaxial Plug, 10S17 Electric Wrist Rotator or 13E205 MyoRotronic or the 13E190 or 13E190=150 distributor.Available in two lengths: 200 mm (13E188=200) or 600 mm (13E188=600)

757B20 EnergyPacks are:Available in colors: 4 (757B20, 757B21), 11 (757B20-1, 757B21-1), 15 (757B20-2, 757B21-2) and Black (757B20-3, 757B21-3)Appropriate for more active patients and SensorHand Speed usersTo be used only for MyoBock Adult SystemsDesigned utilizing Lithiom-Ion technology for longer life than NiCd batteryCapable of integration into almost all socket shapes including long residual limbsFor MyoBock System, 6/7.2 Volt,For integration into all socket shapes, even in cases of long residual limbs. Compared to NiCd battery, these batteries have a lower self-discharge level, higher cell voltage and greater capacity. They have no memory effect.

The System Electric Hand Digital Twin has a lamination ring suitable for wrist disarticulation. It features a centrally guided flat cable with automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. This hand has a potentiometer for adjusting the switching threshold (double-channel control), and an integrated slip clutch that allows the hand to be opened in case of power supply or myoelectric control failure.Gives passive wrist rotation with frictionFeatures a digital and dual channel control mode (desired control selected with integrated 13E185 function plug)Can be operated with the 757B35=* MyoEnergy Integral, 757B20/757B21 EnergyPack or the 757B15 X-ChangePack

SensorHand Speed with lamination ring wrist connection suitable for wrist disarticulation. Passive wrist rotation with friction. The SensorHand Speed features the automatic Auto-Grasp SUVA sensor technology, the FlexiGrip function as well as different control modes for the fitting with one or two electrodes. 13E184=* Coding Plugs of various colors or the 757T13 MyoSelect are used to select the desired control mode.13E184=1 (White: DMC plus control)13E184=2 (Red: AutoControl LowInput control)13E184=3 (Green: AutoControl)13E184=4 (Blue: VarioControl)13E184=5 (Yellow: VarioDual Control)13E184=6 (Violet: DMC plus Control SUVA sensors and FlexiGrip can be switched off)The SensorHand Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack. It features a central flat cable, automatic shut-off electronics and integrated on-off switch, low friction bevel gear, positive back lock, and System Inner Hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.

MyoHand VariPlus Speed with lamination ring wrist connection is suitable for wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. Thanks to the high gripping strength (approx. 100 N) and speed (up to 300 mm/s), objects can be gripped quickly and precisely. With the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications. This permits optimum adaptation to the needs and abilities of the prosthesis wearer. The following control modes can be selected with the 757T13 MyoSelect: DMC plus AutoControl LowInput VarioControl VarioDual DigitalControl DoubleChannel Control The MyoHand VariPlus Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack. With central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.

The Transcarpal Hand DMC (Dynamic Mode Control) Plus utilizes cable lamination anchors to maintain a minimum build height, the Transcarpal Hand DMC plus provides a compact myoelectric option for fitting residual limb lengths from wrist disarticulation to transcarpal levels. This hand provides proportional control of grip speed and grip force in relation to the strength of the muscle signal. It features a centrally guided flat cable, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackMinimal clearance requiredVariable grip speed ranges from 15-130 mm/secCable Loops in lieu of lamination ring provide flexibility in fabrication30% lighter and 30% shorter than a standard 8E38 hand for longer amputationsNo wrist rotation: patient must be able to actively pronate and supinate the hand

The Transcarpal Hand DMC (Dynamic Mode Control) Plus utilizes cable lamination anchors to maintain a minimum build height, the Transcarpal Hand DMC plus provides a compact myoelectric option for fitting residual limb lengths from wrist disarticulation to transcarpal levels. This hand provides proportional control of grip speed and grip force in relation to the strength of the muscle signal. It features a centrally guided flat cable, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackMinimal clearance requiredVariable grip speed ranges from 15-130 mm/secCable Loops in lieu of lamination ring provide flexibility in fabrication30% lighter and 30% shorter than a standard 8E38 hand for longer amputationsNo wrist rotation: patient must be able to actively pronate and supinate the hand

757Z185=1 is the standard version battery box for large lithium-ion battery 757B20 - it does not include 757Z186 locking lever. The battery box is designed to accommodate a 757B20 large lithium-ion Myo battery to provide electric power for the prosthesis. 757Z185=2 includes an external capped outlet for connection to the MyoBoy device. This version also includes integrated screw connection for removing the battery box from the prosthesis.

757Z191=1 is the standard version battery box for small lithium-ion battery 757B21 - it does not include 757Z186 locking lever. The battery box is designed to accommodate a 757B21 small lithium-ion Myo battery to provide electric power for the prosthesis. 757191=2 includes an external capped outlet for connection to the MyoBoy device. This version also includes integrated screw connection for removing the battery box from the prosthesis.